Chapter 04: Semiconductor Diodes and Special Purpose Diodes — Exam Preparation Pack
Course: Electrical and Electronic Circuit (EEC) Course Code: 510203
This pack follows the Chapter 04 notes currently recorded in this repository. It is a practice resource, not a prediction of actual examination questions. Confirm the current syllabus with your department.
1. High-priority topics
- P-N junction formation: diffusion, recombination, depletion region and barrier potential.
- Forward and reverse bias: connections, operation and comparison.
- V-I characteristics: forward region, reverse current and breakdown.
- Ideal and practical diode models.
- LED: working, symbol, current limiting and applications.
- Zener diode: reverse-breakdown operation and voltage regulation.
- Numericals: diode current, LED resistor, Zener current and power.
2. Must-know definitions
Semiconductor diode: A two-terminal semiconductor device, usually formed by a P-N junction, that conducts readily in one direction and strongly opposes current in the opposite direction under normal operating conditions.
P-N junction: The boundary formed between P-type and N-type regions of a semiconductor crystal.
Depletion region: The region around a P-N junction that is depleted of mobile majority carriers and contains fixed ionized impurity atoms.
Barrier potential: The built-in potential difference across the depletion region that opposes the diffusion of majority carriers.
Biasing: The application of an external DC voltage to a diode to control its operating condition.
V-I characteristic: The graph showing the relationship between the voltage across a diode and the current through it.
LED: A Light Emitting Diode that emits light when forward biased due to electroluminescence.
Zener diode: A specially designed P-N junction diode intended to operate in reverse breakdown and maintain an approximately constant voltage over a specified current range.
Anode = P-side. Cathode = N-side.
3. Formation of a P-N junction
Approximate forward voltage values
| Material | Practical approximation |
|---|---|
| Silicon | 0.7 V |
| Germanium | 0.3 V |
4. Forward bias
A P-N junction diode is forward biased when its P-side is connected to the positive terminal and its N-side to the negative terminal of a DC supply.
Working:
5. Reverse bias
A P-N junction diode is reverse biased when its P-side is connected to the negative terminal and its N-side to the positive terminal of a DC supply.
Working:
6. Forward bias vs reverse bias
| Feature | Forward bias | Reverse bias |
|---|---|---|
| P-side | Positive | Negative |
| N-side | Negative | Positive |
| Depletion width | Decreases | Increases |
| Barrier potential | Decreases | Increases |
| Current | Relatively large | Very small before breakdown |
| Main carriers | Majority carriers | Minority-carrier current |
Memory tip: Forward bias narrows the depletion region; reverse bias widens it.
7. V-I characteristics
Forward region: Initially current is small. As forward voltage increases, current rises rapidly. Introductory calculations often use about 0.7 V for silicon and 0.3 V for germanium.
Reverse region: A small reverse saturation current flows. Before breakdown it changes only slightly. At breakdown voltage, reverse current rises sharply.
Zener breakdown: Strong electric field causes quantum-mechanical tunnelling, usually in a heavily doped junction with a narrow depletion region.
Avalanche breakdown: Accelerated carriers create additional electron-hole pairs by impact ionization, causing carrier multiplication.
Exam graph labels: forward region, rapid-rise region, reverse saturation current, breakdown voltage and breakdown region.
8. Diode models
Ideal diode model: Forward biased = perfect short circuit (0 V drop); reverse biased = perfect open circuit (0 A current).
Practical constant-voltage model: Forward-biased silicon diode ≈ 0.7 V; germanium diode ≈ 0.3 V. A reverse-biased diode is treated as open circuit before breakdown.
Solved numerical 1: Forward diode current
Question: A 5 V source is connected in series with a 1 kΩ resistor and a forward-biased silicon diode. Find current using a 0.7 V drop.
Given: Vs = 5 V, Vd = 0.7 V, R = 1000 ohm.
Resistor voltage: Vr = Vs - Vd = 5 - 0.7 = 4.3 V.
By Ohm's law: I = Vr/R = 4.3/1000 = 0.0043 A.
Answer: I = 4.3 mA.
9. Light Emitting Diode (LED)
An LED emits light when forward biased due to electroluminescence.
Working: 1. LED is forward biased. 2. Electrons and holes enter the junction region. 3. Electron-hole recombination occurs. 4. Energy is released as photons, so the LED emits light.
LED symbol: an ordinary diode symbol with two arrows pointing outward to represent emitted light.
Important characteristics: - Normally operates in forward bias. - Emits light when sufficient forward current flows. - Requires a series resistor or suitable driver to limit current. - Colour mainly depends on semiconductor material and band gap. - Maximum current and reverse-voltage ratings must be respected.
Applications: indicator lights, digital displays, traffic signals, lighting systems, optical communication and remote-control transmitters.
Solved numerical 2: LED series resistor
Question: A red LED has a 2 V forward drop. It is connected to a 5 V supply and desired current is 10 mA. Find the resistor.
Given: Vs = 5 V, Vled = 2 V, I = 10 mA = 0.01 A.
Vr = 5 - 2 = 3 V.
R = Vr/I = 3/0.01 = 300 ohm.
Answer: R = 300 ohm. In practical design, check the standard resistor value, power rating and LED datasheet.
10. Zener diode
A Zener diode is designed to operate in reverse breakdown and maintain an approximately constant voltage over a specified current range.
11. Zener diode as a voltage regulator
Solved numerical 3: No-load Zener regulator
Question: A 12 V supply feeds a 6 V Zener diode through a 300 ohm series resistor. Assume no load. Find Zener current and power.
Given: Vin = 12 V, Vz = 6 V, Rs = 300 ohm.
Vr = Vin - Vz = 12 - 6 = 6 V.
Iz = Vr/Rs = 6/300 = 0.02 A = 20 mA.
Pz = Vz × Iz = 6 × 0.02 = 0.12 W.
Answer: Iz = 20 mA; Pz = 0.12 W. This is a no-load calculation. With a load, calculate load current and Zener current separately, then check device ratings.
12. Ordinary diode vs LED vs Zener diode
| Feature | Ordinary P-N diode | LED | Zener diode |
|---|---|---|---|
| Main purpose | One-way current control | Light production | Voltage regulation/reference |
| Normal operating condition | Forward conduction | Forward bias | Reverse breakdown |
| Special behaviour | Rectification/switching | Electroluminescence | Nearly constant reverse voltage |
| Application | Rectifier circuit | Indicator and lighting | Voltage regulator |
13. Formula sheet
Ohm's law: V = IR
Forward diode series current: I = (Vs - Vd) / R
LED current-limiting resistor: R = (Vs - Vled) / Iled
Zener current (no-load): Iz = (Vin - Vz) / Rs
Zener power: Pz = Vz × Iz
| Symbol | Meaning | Unit |
|---|---|---|
| Vs | Supply voltage | V |
| Vd | Diode forward voltage | V |
| Vled | LED forward voltage | V |
| I | Current | A |
| R, Rs | Resistance | ohm |
| Vz | Zener voltage | V |
| Iz | Zener current | A |
| Pz | Zener power | W |
14. Short questions and answers
- What is a P-N junction? The boundary between P-type and N-type regions of a semiconductor crystal.
- What is a depletion region? The region near the junction depleted of mobile majority carriers.
- What is barrier potential? The built-in potential that opposes majority-carrier diffusion.
- Define forward bias. P-side connected to positive and N-side to negative supply terminal.
- Define reverse bias. P-side connected to negative and N-side to positive supply terminal.
- What happens to depletion width in forward bias? It decreases.
- What happens to depletion width in reverse bias? It increases.
- What is reverse saturation current? The small reverse current mainly due to minority carriers before breakdown.
- What is breakdown voltage? The reverse voltage at which reverse current rises sharply.
- What is a diode V-I characteristic? A graph showing the relationship between diode voltage and current.
- What is an ideal diode? A model acting as a short circuit in forward bias and an open circuit in reverse bias.
- What is an LED? A diode that emits light under forward bias due to electroluminescence.
- Why is a resistor used with an LED? To limit current and protect the LED.
- What is a Zener diode? A diode designed to operate in reverse breakdown and provide an approximately constant voltage.
- What is Zener voltage? The specified reverse-breakdown voltage of a Zener diode.
- Mention two applications of LED. Indicator lights and lighting systems.
- Mention two applications of Zener diode. Voltage regulation and voltage reference.
- What is electroluminescence? Light emission caused by electrical excitation and electron-hole recombination.
15. Broad / descriptive questions
- Explain the formation of a P-N junction and depletion region with a diagram.
- Explain the operation of a P-N junction diode under forward bias.
- Explain the operation of a P-N junction diode under reverse bias.
- Draw and explain the V-I characteristics of a P-N junction diode.
- Differentiate between forward bias and reverse bias.
- Explain ideal and practical diode models.
- Describe the construction, working principle and applications of LED.
- Explain why a current-limiting resistor is required with an LED.
- Describe the construction and operation of a Zener diode.
- Explain the operation of a Zener diode as a voltage regulator.
- Differentiate between ordinary P-N diode, LED and Zener diode.
Suggested answer structure: Definition → labelled diagram → formation/working → characteristics → applications or comparison → conclusion.
16. Numerical practice
Use the constant-voltage model where appropriate.
Problem 1: A 10 V source is connected in series with a 1.5 kΩ resistor and a forward-biased silicon diode. Find current using a 0.7 V diode drop.
Problem 2: A 9 V supply drives an LED with a forward drop of 2 V at a desired current of 20 mA. Find the required series resistance.
Problem 3: A 15 V source is connected to a 5.1 V Zener diode through a 470 Ω resistor. Assuming no load, calculate Zener current and power.
Answer key
- I = (10 - 0.7) / 1500 ≈ 6.2 mA.
- R = (9 - 2) / 0.02 = 350 ohm.
- Iz = (15 - 5.1) / 470 ≈ 21.1 mA; Pz ≈ 5.1 × 0.0211 = 0.108 W.
These are idealized results. In practical design, verify component ratings and operating limits.
17. Self-test
- Which semiconductor region forms the anode?
- What causes the depletion region to form?
- Which bias condition makes the depletion region narrower?
- Why is reverse current small before breakdown?
- What does a diode V-I graph represent?
- What is the approximate forward drop used for a silicon diode in the practical model?
- What is the physical process behind LED light emission?
- Why does an LED need a current-limiting resistor?
- In which operating region does a Zener diode regulate voltage?
- What happens to Zener current if input voltage rises and output remains regulated?
- Can an ordinary rectifier diode automatically be treated as a Zener diode?
- State the formula for Zener power.
Answers
- P-type region.
- Diffusion and recombination leave fixed ionized atoms near the junction.
- Forward bias.
- It is mainly due to minority carriers.
- The relationship between diode voltage and diode current.
- Approximately 0.7 V.
- Electroluminescence due to electron-hole recombination.
- To limit current and protect the LED.
- Reverse-breakdown region.
- Zener current increases, assuming the circuit remains within ratings and load current is unchanged.
- No. The diode must be designed and rated for reverse-breakdown operation.
- Pz = Vz × Iz.
18. Common mistakes to avoid
- Forward bias: P-side positive, N-side negative.
- Reverse bias: P-side negative, N-side positive.
- Forward bias narrows the depletion region; reverse bias widens it.
- Reverse current is small, not exactly zero, before breakdown.
- 0.7 V for silicon is an approximation, not an exact universal value.
- LED requires current limiting.
- Zener regulation requires correct series resistance and permitted current.
- Ordinary diode reverse breakdown is not automatically safe.
- Convert mA to A before using formulas with SI units.
- Write the unit in the final numerical answer.
19. One-page revision checklist
- [ ] Define diode, P-N junction, depletion region and barrier potential.
- [ ] Draw and explain P-N junction formation.
- [ ] Memorize forward-bias and reverse-bias connections.
- [ ] Compare depletion width and current in both bias conditions.
- [ ] Draw and label the diode V-I characteristic.
- [ ] Explain ideal and practical diode models.
- [ ] Explain LED operation and electroluminescence.
- [ ] Calculate LED current-limiting resistance.
- [ ] Explain Zener diode reverse-breakdown operation.
- [ ] Draw and explain a basic Zener shunt regulator.
- [ ] Calculate Zener current and power.
- [ ] Practise the short questions and numerical problems.
Recommended study sequence: P-N junction formation → forward/reverse bias → V-I graph → LED → Zener diode and numerical practice.
Next: Chapter 05 — Regulated Power Supply Exam Preparation Pack.