Skip to content

Practical 07: Looping Statements in C (for, while, and do-while)

Practical status: Suggested practice practical for SPL Lab. This is the seventh exercise in this notes collection, not a verified official NU experiment number. Follow your department's current lab manual if its sequence or requirements differ.

1. Aim

To understand and implement the three looping statements in C: for, while, and do-while.

2. Learning Outcomes

After completing this practical, you should be able to:

  • Explain why loops are used in programming.
  • Identify the initialization, condition, and update parts of a loop.
  • Write programs using for, while, and do-while.
  • Trace loop execution step by step.
  • Avoid common loop errors, including infinite loops and off-by-one errors.

3. Theory

A loop repeats a block of statements while a specified condition is true. Loops help us avoid writing the same statements again and again.

For example, to print the numbers from 1 to 5, we can use a loop instead of writing five separate printf() statements.

Types of loops in C

Loop Condition checking Minimum executions
for Before the loop body 0
while Before the loop body 0
do-while After the loop body 1

A. for loop

A for loop is useful when the number of repetitions is known or controlled by a counter.

Syntax:

for (initialization; condition; update) {
    // statements
}
  • Initialization: Sets the starting value.
  • Condition: The loop continues while this condition is true.
  • Update: Changes the counter after each iteration.

B. while loop

A while loop is useful when repetition depends on a condition and the number of iterations may not be known in advance.

Syntax:

while (condition) {
    // statements
    // update, when needed
}

The condition is checked before each execution of the loop body.

C. do-while loop

A do-while loop executes its body first and checks the condition afterward. Therefore, its body runs at least once.

Syntax:

do {
    // statements
} while (condition);

Notice the semicolon after the while condition.

4. Program 1: Print Numbers from 1 to N Using for

C Code

#include <stdio.h>

int main(void) {
    int n;
    long long i;

    printf("Enter a positive integer: ");
    if (scanf("%d", &n) != 1) {
        printf("Invalid input.\n");
        return 1;
    }

    if (n < 1) {
        printf("Please enter a number greater than zero.\n");
        return 1;
    }

    for (i = 1; i <= n; i++) {
        printf("%lld ", i);
    }

    printf("\n");
    return 0;
}

Explanation

  1. The program reads a positive integer n.
  2. The variable i starts from 1.
  3. The condition i <= n is checked before each iteration.
  4. The loop prints i.
  5. The update expression i++ increases `i by 1.
  6. The loop stops when i <= n becomes false.

Sample Input and Output

Enter a positive integer: 5
1 2 3 4 5

5. Program 2: Calculate the Sum from 1 to N Using while

C Code

#include <stdio.h>

int main(void) {
    int n;
    long long i = 1, sum = 0;

    printf("Enter a positive integer: ");
    if (scanf("%d", &n) != 1) {
        printf("Invalid input.\n");
        return 1;
    }

    if (n < 1) {
        printf("Please enter a number greater than zero.\n");
        return 1;
    }

    while (i <= n) {
        sum = sum + i;
        i++;
    }

    printf("Sum = %lld\n", sum);
    return 0;
}

Explanation

  1. i is initialized to 1 and sum to 0.
  2. The condition i <= n is checked.
  3. The current value of i is added to sum.
  4. i++ increases the counter.
  5. When i becomes greater than n, the loop ends.
  6. The final sum is displayed.

Sample Input and Output

Enter a positive integer: 5
Sum = 15

6. Program 3: Repeat Input Using do-while

This program keeps asking the user for a positive number until a valid positive number is entered. It demonstrates that a do-while body runs at least once.

C Code

#include <stdio.h>

int main(void) {
    int number;

    do {
        printf("Enter a positive integer: ");

        if (scanf("%d", &number) != 1) {
            printf("Invalid input. Please enter an integer.\n");
            return 1;
        }

        if (number <= 0) {
            printf("The number must be greater than zero.\n");
        }

    } while (number <= 0);

    printf("You entered: %d\n", number);
    return 0;
}

Explanation

  1. The program enters the do block without checking a condition first.
  2. It asks the user to enter an integer.
  3. If the number is not positive, an explanatory message is displayed.
  4. The condition number <= 0 is checked at the end.
  5. If the condition is true, the body repeats; otherwise, the loop ends.

Sample Input and Output

Enter a positive integer: -3
The number must be greater than zero.
Enter a positive integer: 0
The number must be greater than zero.
Enter a positive integer: 8
You entered: 8

7. Dry Run: for Loop

Suppose n = 4 in Program 1.

Iteration Value of i before printing Condition i <= 4 Output
1 1 True 1
2 2 True 2
3 3 True 3
4 4 True 4
Stop check 5 False —

Final output: 1 2 3 4

8. Comparison of the Three Loops

Feature for while do-while
Condition checked Before body Before body After body
Minimum body execution 0 0 1
Common use Counter-controlled repetition Condition-controlled repetition At-least-once repetition
Semicolon after condition No No Yes

All three loops can often solve the same problem. Choose the loop that makes the program's intention easiest to understand.

9. How to Compile and Run

Save each program in a separate file, for example:

  • print_numbers.c
  • sum_while.c
  • input_do_while.c

Using GCC:

Windows:

gcc print_numbers.c -o print_numbers.exe
.\print_numbers.exe

Linux / macOS:

gcc print_numbers.c -o print_numbers
./print_numbers

Change the source filename and output name when compiling the other programs. If GCC is not installed or configured, use the C compiler/IDE available in your lab.

10. Common Mistakes

  • Forgetting to update the loop counter.
  • Writing a condition that never becomes false, causing an infinite loop.
  • Using i < n when the task requires including n.
  • Placing an unnecessary semicolon after a for or while statement.
  • Forgetting the required semicolon after the while condition in a do-while loop.
  • Confusing i++ with i = i + 1; both increase i by one.
  • Using an unsuitable data type for a large sum.

11. Practice Tasks

Try these independently:

  1. Print all even numbers from 1 to N using a for loop.
  2. Calculate the factorial of a positive integer using a while loop. Consider the special case 0! = 1.
  3. Display a multiplication table for a number using a for loop.
  4. Reverse the digits of a positive integer using a while loop.
  5. Create a menu that repeats until the user selects an exit option, using do-while.

12. Viva Questions

Q1. What is a loop? A: A loop is a control structure that repeatedly executes a block of statements while a condition allows it.

Q2. How many types of loops are available in C? A: Three basic types: for, while, and do-while.

Q3. Which loop executes at least once? A: The do-while loop.

Q4. What is an infinite loop? A: A loop that does not terminate because its condition never becomes false or no effective exit is reached.

Q5. What is the purpose of the update expression in a counter-controlled loop? A: It changes the counter so that the loop can eventually reach its stopping condition.

Q6. What is the difference between while and do-while? A: while checks the condition before the body; do-while checks it after the body.

Q7. Can a for loop run zero times? A: Yes. If its condition is false at the first check, its body does not execute.

Q8. Why is a semicolon used after the condition in do-while? A: It is part of the required syntax of the do-while statement.

13. Result

The three looping statements in C—for, while, and do-while—were studied and demonstrated through simple programs.


Learning note: This is a suggested practice exercise organized around SPL topics. Check your current department lab manual for the required practical sequence and report format.